1st Choice Residential journal
Can You Use a Gas Fireplace During a Power Outage? Mobile, AL Guide
Most gas fireplaces with a standing pilot or a battery backup still light when the power goes out. Here's how to tell which one you have and use it safely.

Yes, you can usually use a gas fireplace during a power outage. A gas fireplace with a standing pilot needs no electricity at all. A newer one with electronic ignition needs power to spark, but many have a battery backup that lights it with the house dark. The blower fan will not run, and you need working battery CO alarms.
Quick answer
- Standing pilot: works with the power out. Turn it on like normal.
- Electronic ignition with battery backup: works once fresh batteries are in.
- Electronic ignition with no backup: will not light until power is back.
- Blower fan: off until power returns. You still get radiant heat.
- Never: run a generator in the garage or carport to keep the fan going.
Picture it: a storm rolls through Mobile, the power blinks off, and the house goes quiet except for the kids asking if the Wi-Fi is "a little bit broken or totally broken." Your gas fireplace can turn a cold, dark evening into a family campout in the living room. Board games, flashlights, and hot cocoa from the gas stovetop. The trick is knowing what kind of fireplace you have before the lights go out.
Can you use a gas fireplace during a power outage if it has a standing pilot?
Yes. A standing pilot (also called a millivolt system) keeps a tiny flame burning all the time, and that flame makes its own small electric current to open the gas valve. No house power is needed. Heat and Glo, one of the largest fireplace makers, confirms that a standing pilot fireplace will light during a power outage.
How to tell: with the fireplace off, look through the glass. A small blue flame burning on its own means standing pilot. A valve knob marked OFF, PILOT and ON behind the lower grille is another giveaway.
What about gas fireplaces with electronic ignition?
They need power to spark, so check for a battery backup. Many fireplaces built in recent years use intermittent pilot ignition (IPI). The pilot only lights when you call for heat, which saves gas, but it needs electricity to make the spark. Many of these systems have a battery pack in the lower controls for exactly this reason.
Here is how to light one when the power is out:
- Check the pilot. Look through the glass. If a small blue pilot flame is already burning, you have a standing pilot and can turn the fireplace on with its knob or wall switch as usual.
- Find the battery backup. If there is no pilot, open the lower grille and look for a control or battery box. Many models take D-cell or AA batteries.
- Load fresh batteries and set the switch. Put fresh batteries in the holder and, if your model has an ON, OFF and REMOTE switch, slide it to ON so the fireplace runs with the power off.
- Light it and stay in the room. Turn the fireplace on, keep kids and pets back from the glass, and keep blankets and toys 3 feet away.
- Take the batteries out when power returns. When the lights come back on, remove the batteries and store them with your flashlight so they are fresh for the next outage.
Your owner's manual is the boss here. Battery types and switch names vary by brand, so check it once now, while the lights are on, and tape a note inside the lower grille. Future you, holding a flashlight in your teeth, will say thanks.
Fireplace types in a power outage: quick comparison
| Fireplace type | Lights with power out? | Blower works? | What to do |
|---|---|---|---|
| Gas, standing pilot | Yes | No | Turn on as usual |
| Gas, electronic ignition with battery backup | Yes, with fresh batteries | No | Load batteries, set switch to ON |
| Gas, electronic ignition, no backup | No | No | Wait for power, or ask about a backup kit |
| Wood-burning fireplace | Yes | No fan | Burn dry wood, open the damper |
How do you stay safe using a gas fireplace during a power outage?
Make sure your carbon monoxide alarms work without house power, and keep the fireplace for one room. Outages are when families get creative with heat, and that is when CO accidents happen. The U.S. Consumer Product Safety Commission lists these outage rules:
- CO alarms: use battery-operated alarms or alarms with battery backup on every level of the home and outside sleeping areas.
- Generators: outside only, at least 20 feet from the house. Never in the garage, carport or on the porch.
- Never use charcoal indoors. Not in the fireplace, not in the garage.
- Candles: flashlights and battery candles are safer. Never leave a candle burning in an empty room.
- Smell gas? Leave the house and call the gas company from outside.
Family tip: make the fireplace room the "campout room." Everyone sleeps in one warm space, the glass gets a 3-foot no-toy zone, and the grandparents get the comfy chair closest to the heat. Turn the fireplace off before lights-out. More on alarms in our post on carbon monoxide detectors and gas fireplaces.
What our techs see
The fireplace that won't light in an outage is usually not broken. Most of the time the battery pack is empty, corroded from batteries left in for years, or the owner never knew the backup switch existed. On the Gulf Coast we also see pilots that were turned off for summer and never relit, plus pilot assemblies clogged with dust and spider webs, which is why a pilot won't stay lit right when you need it most.
Where DIY stops
Lighting a standing pilot by the manual and swapping backup batteries are fair DIY jobs. Stop and call a pro if you smell gas, the pilot will not stay lit after two tries, the glass is cracked, or water from a storm reached the valve or controls. Heat and Glo says its fireplaces that were exposed to flood or hurricane water should not be used until checked. That is not a "try it and see" moment.
A gas fireplace inspection and tune-up from 1st Choice Residential is $199. We clean the burner and pilot, test the ignition and battery backup, and check the glass and venting, so your fireplace is the hero of the next outage instead of the mystery. Gas fireplace repair starts at $199, and every job carries a 1-year workmanship warranty.
Where we serve
- Mobile, Baldwin County and Pensacola: (251) 272-1990
- Dallas-Fort Worth: (817) 791-4606
Book your gas fireplace inspection online before the next storm.
Gas fireplace power outage FAQ
Will a gas fireplace work without electricity?
Often, yes. A gas fireplace with a standing pilot runs on a small millivolt current made by the pilot flame itself, so it lights with the power off. Newer units with intermittent pilot ignition need electricity to spark, but many have a battery backup. 1st Choice Residential can tell you which system your fireplace has during a $199 gas fireplace inspection in Mobile.
How do I know if my gas fireplace has a standing pilot?
Look through the glass or open the lower control panel while the fireplace is off. If a small blue flame is burning by itself, or the valve knob says OFF, PILOT and ON, you have a standing pilot. If there is no flame until you hit the switch, it is likely electronic ignition. 1st Choice Residential checks ignition systems in Mobile and Baldwin County.
Why won't my gas fireplace blower work during a power outage?
The blower fan runs on household electricity, so it stops when the power goes out even if the flames still burn. The fireplace still gives off radiant heat, just less of it spread around the room. Do not plug the blower into a generator cord run through a window or door. 1st Choice Residential services gas fireplace blowers in Mobile, AL.
Is it safe to sleep with a gas fireplace on during an outage?
It is safest to turn it off before bed. Your CO alarms may not work if they are hardwired without battery backup, and no one is awake to notice a problem. CPSC recommends battery-powered CO alarms or alarms with battery backup on every level. 1st Choice Residential inspects gas fireplaces in Mobile and Baldwin County so they are ready before storm season.
Can I use my gas fireplace after a hurricane flood?
No. If water reached the fireplace, its valve, or its controls, do not light it. Heat and Glo, one major manufacturer, says its products exposed to flood or hurricane water should not be used. The gas valve and controls need to be checked or replaced first. 1st Choice Residential inspects storm-exposed gas fireplaces across Mobile and Baldwin County, AL.
Written by the 1st Choice Residential team. Veteran-owned since 2009, NFI-certified techs, serving DFW and Mobile & Baldwin County.
